Subversion Repositories mkgmap

Note that option order is significant:  An option only applies to
subsequent input files.  (So if you are using splitter, you probably
want to put most of your options before '-c template.args'.)

General options:

--help=topic
        Print help on the given topic.  If the topic is omitted then a
        list of all the help topics is printed instead.

--version 
        Output program version to stderr.

filename
--input-file=filename
        Read input data from the give file.  This option (or just a
        filename) may be given more than once.

--gmapsupp
        Create a gmapsupp.img file that can be uploaded to a Garmin or
        placed in "/Garmin" in a microSD card (such as by mounting the
        device in USB mass storage mode).  It can be used on ready
        compiled img files, if the input files are not already compiled
        then they are compiled first and then the gmapsupp is created.

-c filename
--read-config=filename
        The given file is opened and each line is an option setting of
        the form option=value, any option that could be used on the command
        line can be used, however you omit the leading '--'.  The short
        option names with a single '-' cannot be used, simply use the
        long name instead.

--output-dir=filename
    The directory in which all output files are written. It defaults
    to the current working directory, ie. the directory the command is
    executed from.

-n name
--mapname=name
        Set the name of the map. Garmin maps are named by 8 digit
        numbersList.  The default is 63240001.  It is best to use a different
        name if you are going to be making a map for others to use so
        that it is unique and does not clash with others.

--description=text
        Sets the descriptive text for the map. This may be displayed in
        QLandkarte, MapSource on on a GPS etc, where it is normally shown
        below the family name. Example: --description="Germany, Denmark"
        Please note: if you use splitter.jar to build a template.args file
        and use -c template.args, then that file may contain a
        "description" that will override this option. Use "--description" in
        splitter.jar to change the description in the template.args file.

--country-name=name
        Sets the map's country name. The default is "COUNTRY".

--country-abbr=abbreviation
        Sets the map's abbreviated country name. The default is "ABC".

--region-name=name
        Sets the map's region name. By default, the map has no region name.

--region-abbr=abbreviation
        Sets the map's abbreviated region name. By default, the map has
        no abbreviated region name.
        
Label options:

--latin1
        This is equivalent to --code-page=1252.

--code-page=number
    This option enables the use of international characters. Only 8 bit
    character sets are supported and so you have to specify which code page
    you want to use.

        It is entirely dependant on the device firmware which code pages are
        supported.
        
--charset=name
        This option is obsolete. Change the character set with the --code-page
        option.

--lower-case
        Allow labels to contain lower case letters.  Note that most or all
        Garmin devices are not able to display lower case letters at an angle
        so this option is not generally useful.

Address search options:
--index
        Generate a global address search index. If the --gmapsupp option is
        also given, then the index is generated within the resulting
        gmapsupp.img file so that address search will work on a GPS
        device.

        If instead the --tdbfile option is given then the index consists
        of two files named osmmap.mdx and osmmap_mdr.img which can be used
        with mapsource. (For compatibility, you do not need the tdbfile
        option if gmapsupp is not given).

        If both the --gmapsupp and --tdbfile options are given alongside
        the --index option, then both indexes will be created. Note that
        this will require roughly twice as much memory.

        The --overview-mapname option can be used to change these names.  If
        the mapset is sent to the device from MapSource, it will enable
        find by name and address search on the GPS.
        
        The address fields are assigned by special mkgmap address
        tags using the style file:
          mkgmap:country
          mkgmap:region
          mkgmap:city
          mkgmap:postal_code
          mkgmap:street
          mkgmap:housenumber
          mkgmap:phone
          (mkgmap:is_in - used by location-autofill=is_in)

  If the index is created from previously compiled .img files, then the
  same code page and sorting options (eg. --code-page, --latin1 etc) must
  be used as were used to compile the individual map tiles.

--bounds=directory|zipfile
    A directory or a zipfile containing the preprocessed bounds files. 
    Bounds files in a zipfile must be located in the zipfiles root directory.

    The preprocessed boundaries are used to add special tags to all elements 
    (points, lines and polygons) containing the elements location information.
    The style file can be used to assign the address tags mkgmap:country,
    mkgmap:region etc. using these values.
    
    The following special tags are added:          
              mkgmap:admin_level2 : Name of the admin_level=2 boundary 
              mkgmap:admin_level3 : Name of the admin_level=3 boundary
              ..
              mkgmap:admin_level11
              mkgmap:postcode : the postal_code value
              
    Preprocessed bounds can be created with the following command:
       java -cp mkgmap.jar 
          uk.me.parabola.mkgmap.reader.osm.boundary.BoundaryPreprocessor
          <inputfile> <boundsdir>
    
    The input file must contain the boundaries that should be preprocessed. 
    It can have OSM, PBF or O5M fileformat. It is recommended that it 
    contains the boundary data only to avoid very high memory usage.
    The boundsdir gives the directory where the processed files are stored.
    This directory can be used as --bounds parameter with mkgmap.               
    
--location-autofill=[option1,[option2]]
        Controls how the address fields for country, region, city and zip info 
        are gathered automatically if the fields are not set by using the special 
        mkgmap address tags (e.g. mkgmap:city - see option index).
        Warning: automatic assignment of address fields is somehow a best guess.

    is_in     The is_in tag is analyzed for country and region information.
              
    nearest   The city/hamlet points that are closest to the element are used 
              to assign the missing address fields. Beware that cities located 
              in the same tile are used only. So the results close to a tile 
              border have less quality.  

Overview map options:
--overview-mapname=name
        If --tdbfile is enabled, this gives the name of the overview
        .img and .tdb files. The default map name is osmmap.

--overview-mapnumber=8 digit number
        If --tdbfile is enabled, this gives the internal 8 digit
        number used in the overview map and tdb file.  The default
        number is 63240000.

--overview-levels
  like levels, specifies additional levels that are to be written to the
  overview map. Counting of the levels should continue. Up to 8 additional 
  levels may be specified, but the lowest usable resolution with MapSource 
  seems to be 11. The hard coded default is empty.      

--remove-ovm-work-files
  If overview-levels is used, mkgmap creates one additional file 
  with the prefix ovm_ for each map (*.img) file. 
  These files are used to create the overview map.
  With option --remove-ovm-work-files=true the files are removed 
  after the overview map was created. The default is to keep the files.  

Style options:
--style-file=file
        Specify an external file to obtain the style from.  "file" can
        be a directory containing files such as info, lines, options
        (see resources/styles/default for an example).  The directory
        path must be absolute or relative to the current working
        directory when mkgmap is invoked.

        The file can be a zip file containing the files instead of a
        directory.

        The files can be at the top level or contained in a folder within
        the zip file.  If the zip file contains more than one top level
        folder then each folder is the name of a style that can be selected
        with the --style option.

        The argument can also be a URL that specifies the location of a
        style file.

--style=name
        Specify a style name. Must be used if --style-file points to a 
  directory or zip file containing multiple styles. If --style-file 
  is not used, it selects one of the builtin styles. 

--list-styles
        List the available styles. If this option is preceeded by a style-file
        option then it lists the styles available within that file.

--check-styles
        Perform some checks on the available styles. If this option is 
  preceeded by a style-file option then it checks the styles 
  available within that file. If it is also preceded by the style
  option it will only check that style.

--levels=levels code
        Change the way that the levels on the map correspond to the zoom
        levels in the device. See customisation help. The default is:
        "0:24, 1:22, 2:20, 3:18, 4:16", although each style can have
        its own default. Up to 8 levels may be specified.

--name-tag-list
        Get the tag that will be used to supply the name.  Useful for
        language variations.  You can supply a list and the first one
        will be used.  eg. --name-tag-list=name:en,int_name,name

--map-features=file
        This option is ignored; use the --style-file option instead.

Product description options:

--family-id
        This is an integer that identifies a family of products.
        Range: [1..9999]
        Mkgmap default: 6324

--family-name
        If you build several maps, this option describes the
        family name of all of your maps. Garmin will display this
        in the map selection screen.
        Example: --family-name="OpenStreetmap mkgmap XL 2019"

--product-id
        This is an integer that identifies a product within a family.
        It is often just 1, which is the default.

--product-version
        The version of the product. Default value is 1.

--series-name
        This name will be displayed in MapSource in the map selection
        drop-down. The default is "OSM map".

--area-name
  Area name is displayed on Garmin units (or at least on eTrex) as the second 
  part of the mapname in the list of the individual maps.
   
--copyright-message=note
        Specify a copyright message for files that do not contain one.

--license-file=file
        Specify a file which content will be added as license. 
  All entrys of all maps will be merged in the overview map.

Optimization options:

--reduce-point-density=NUM
        Simplifies the ways with the Douglas Peucker algorithm.
        NUM is the maximal allowed error distance, by which the resulting
        way may differ from the original one.
        This distance gets shifted with lower zoom levels. 
        Recommended setting is 4, this should lead to only small differences
        (Default is 2.6, which should lead to invisible changes)

--reduce-point-density-polygon=NUM
        Allows to set the maximal allowed error distance for the DP algorythm
        to be applied against polygons. Recommended setting is 8.

--merge-lines
        Try to merge lines. This helps the simplify filter to straighten out
        longer chunks at lower zoom levels. Decreases file size more.
        Increases paint speed at low zoom levels.
  Default is enabled, use --no-merge-lines to disable.
        
--min-size-polygon=NUM
  Removes all polygons smaller than NUM from the map.
  This reduces map size and speeds up redrawing of maps. 
  Recommended value is 8 to 15, default is 8.
  See also polygon-size-limits.
   
--polygon-size-limits=limits code
  Allows to specify different min-size-polygon values for each resolution.
  Sample:  
  --polygon-size-limits="24:12, 18:10, 16:8, 14:4, 12:2, 11:0"
  If a resolution is not given, mkgmap uses the value for the next higher 
  one. For the given sample, resolutions 19 to 24 will use value 12,
  resolution 17 and 18 will use 10, and so on.
  Value 0 means to skip the size filter. 
  Note that in resolution 24 the filter is not used.  
   
Miscellaneous options:

--max-jobs[=number]
        When number is specified, allow that number of maps to be
        processed concurrently. If number is not specified, the limit
        is set equal to the number of CPU cores. If this option is not
        given at all, the limit is 1 (i.e., the maps are processed
        sequentially).

--keep-going
        Don't quit whole application if an exception occurs while
        processing a map - continue to process the other maps.

--block-size=number
        Changes the block size that is used in the generated map. This
        option is not usually needed, but sometimes an error message
        will ask you to try a value for this option.

--net
        Obsolete, use --route instead.

--route
        Create maps that support routing.

--drive-on-left
--drive-on-right
        Explicitly specify which side of the road vehicles are
        expected to drive on. If neither of these options are
        specified, it is assumed that vehicles drive on the right
        unless --check-roundabouts is specified and the first
        roundabout processed is clockwise.

--check-roundabouts
        Check that roundabouts have the expected direction (clockwise
        when vehicles drive on the left). Roundabouts that are complete
        loops and have the wrong direction are reversed. Also checks
        that the roundabouts do not fork or overlap other roundabouts.

--check-roundabout-flares
        Sanity check roundabout flare roads - warn if they don't point
        in the correct direction or if they are not oneway or if they
        extend too far.

--max-flare-length-ratio=NUM
        When checking flare roads, ignore roads whose length is
        greater than NUM (an integer) times the distance between the
        nodes on the roundabout that the flare roads connect to. Using
        this option with a value of at least 5 will cut down the
        number of legitimate roads that are flagged as flare road
        problems. Default value is 0 (disabled) because it's not a
        completely reliable heuristic.

--ignore-maxspeeds
        When reading OSM files, ignore any "maxspeed" tags.

--ignore-builtin-relations
        When reading OSM files, skip the built-in processing of
        relations. This speeds up the processing non-routable map
        layers that do not contain multipolygons. This implies
        --ignore-turn-restrictions.

--ignore-turn-restrictions
        When reading OSM files, ignore any "restriction" relations.

--ignore-osm-bounds
        When reading OSM files, ignore any "bounds" elements.
        With this option selected generate-sea sometimes works better,
        but routing across tiles will not work.

--preserve-element-order
        Process the map elements (nodes, ways, relations) in the order
        in which they appear in the OSM input. Without this option,
        the order in which the elements are processed is not defined.

--remove-short-arcs[=MinLength]
        Merge nodes to remove short arcs that can cause routing
        problems. If MinLength is specified (in metres), arcs shorter
        than that length will be removed. If a length is not
        specified, only zero-length arcs will be removed.

--adjust-turn-headings[=BITMASK]
        Where possible, ensure that turns off to side roads change
        heading sufficiently so that the GPS believes that a turn is
        required rather than a fork. This also avoids spurious
        instructions to "keep right/left" when the road doesn't
        actually fork.

        Optional BITMASK (default value 3) allows you to specify which
        adjustments are to be made (where necessary):

        1 = increase angle between side road and outgoing main road
        2 = increase angle between side road and incoming main road

--report-similar-arcs
        Issue a warning when more than one arc connects two nodes and
        the ways that the arcs are derived from contain identical
        points. It doesn't make sense to use this option at the same
        time as using the cycleway creating options.

--report-dead-ends=LEVEL
        Set the dead end road warning level. The value of LEVEL (which
        defaults to 1 if this option is not specified) determines
        those roads to report: 0 = none, 1 = multiple oneway roads
        that join together but go nowhere, 2 = individual oneway roads
        that go nowhere.

--road-name-pois[=GarminCode]
        Generate a POI for each named road. By default, the POIs'
        Garmin type code is 0x640a. If desired, a different type code
        can be specified with this option.  This is a workaround for not
        being able to search for roads.
        0x2f15: a blue dot in the middle of the road, and if you select,
                or 'hover' over it, the streetname appears.
        
--add-pois-to-lines
        Generate POIs for lines. For each line (must not be closed) POIs are
        created at several points of the line. Each POI is tagged with the
        same tags like the line and additional tags added by mkgmap:
        mkgmap:line2poi=true and tag mkgmap:line2poitype having
        the following values:
           * start  - The first point of the line
           * end    - The last point of the line
           * inner  - Each point of the line except the first and the last 
           * mid    - The middle point

--add-pois-to-areas
        Generate a POI for each polygon and multipolygon. The POIs are created 
        after the relation style but before the other styles are applied. Each 
        POI is tagged with the same tags of 
        the area/multipolygon. Additionally the tag mkgmap:area2poi=true is 
        set so that it is possible to use that information in the points style
        file. Artifical polygons created by multipolyon processing are not used.
        The POIs are created at the following positions (first rule that applies):
           polygons: 
               * the first node tagged with a tag defined by the pois-to-areas-placement 
                 option
               * the center point  
           multipolygons:
               * the node with role=label
               * the center point of the biggest area

--pois-to-areas-placement[=taglist]
    A semicolon separated list of tag=value definitions. A POI is placed at the first
    node of the polygon tagged with the first tag/value pair. If none of the nodes are
    tagged with the first tag-value pair the first node tagged with the second tag-value
    pair is used and so on. If none of the tag-value pairs matches or the taglist is empty 
    the center of the polygon is used.
    It is possible to define wildcards for tag values like entrance=*.
    Default: entrance=main;entrance=yes;building=entrance

--precomp-sea=directory|zipfile
    Defines the directory or a zip file that contains precompiled sea tiles. 
    Sea files in a zipfile must be located in the zipfiles root directory or in 
    a sub directory sea. When this option is defined all natural=coastline tags 
    from the input OSM tiles are removed and the precompiled data is used instead. 
    This option can be combined with the generate-sea options multipolygon, polygons 
    and land-tag. The coastlinefile option is ignored if precomp-sea is set.      

--coastlinefile=filename[,filename]
        Defines a comma separated list of files that contain coastline 
        data. The coastline data from the input files is removed if 
        this option is set. Files must have OSM or PBF fileformat.      

--generate-sea[=ValueList]
        Generate sea polygons. ValueList is an optional comma
        separated list of values:

        multipolygon
                generate the sea using a multipolygon (the default
                behaviour so this really doesn't need to be specified).

        polygons | no-mp
                don't generate the sea using a multipolygon - instead,
                generate a background sea polygon plus individual land
                polygons with tag natural=land. This requires a
                suitable land polygon type to be defined in the style
                file (suggested type is 0x010100) and the polygon must
                be defined in the TYP file as having a higher drawing
                level than the sea polygon type.

        no-sea-sectors
                disable the generation of "sea sectors" when the
                coastline fails to reach the tile's boundary.
                
        extend-sea-sectors
          same as no-sea-sectors. Additional adds a point so 
          coastline reaches the nearest tile boundary.

        land-tag=TAG=VAL
                tag to use for land polygons (default natural=land).

        close-gaps=NUM
                close gaps in coastline that are less than this
                distance (metres)

        floodblocker 
                enable the flood blocker that prevents a flooding of
                land by checking if the sea polygons contain streets
                (works only with multipolygon processing)               

        fbgap=NUM           
                flood blocker gap in metre (default 40)
                points that are closer to the sea polygon do not block 

        fbthres=NUM
                at least so many highway points must be contained in 
                a sea polygon so that it may be removed by the flood
                blocker (default 20)

        fbratio=NUM
                only sea polygons with a higher ratio 
                (highway points * 100000 / polygon size) are removed 
                (default 0.5)
                
        fbdebug
                switches on the debugging of the flood blocker
                generates GPX files for each polygon checked by
                the flood blocker

--make-poi-index
        Generate the POI index (not yet useful).

--nsis
        Write a .nsi file that can be used with the Nullsoft Scriptable Install System
        (NSIS) to create a Windows Mapsource Installer.

--make-all-cycleways
        Turn on all of the options that make cycleways.

--make-opposite-cycleways
        Some oneway streets allow bicycle traffic in the reverse
        direction and this option makes a way with the same points as
        the original that allows bicycle traffic (in both directions).

--make-cycleways
        Some streets have a separate cycleway track/lane just for
        bicycle traffic and this option makes a way with the same
        points as the original that allows bicycle traffic. Also,
        bicycle traffic is prohibited from using the original way
        (unless that way's bicycle access has been defined).

--link-pois-to-ways
        If this option is enabled, POIs that are situated at a point
        in a way will be associated with that way and may modify the
        way's properties. Currently supported are POIs that restrict
        access (e.g. bollards). Their access restrictions are applied
        to a small region of the way near the POI.

--process-destination
        Splits all motorway_link and trunk_link ways tagged with 
        destination     into two or three parts where the second part
        is additionally tagged with mkgmap:dest_hint=true. This 
        allows to use any routable Garmin type (except 0x08 and 0x09)
        for that part so that the Garmin device tells the name of
        this part as hint which destination to follow.
        
--process-exits
    Usual Garmin devices do not tell the name of the exit on motorways 
    while routing with mkgmap created maps. This option splits the each
    motorway_link and trunk_link into three parts. All parts are tagged 
    with the original tags of the link. Additionally the middle part is 
    tagged with the following tags:
      mkgmap:exit_hint=true
      mkgmap:exit_hint_ref=<ref tag value of the exit>
      mkgmap:exit_hint_name=<name tag value of the exit>
      mkgmap:exit_hint_exit_to=<exit_to tag value of the exit>
    Adding a rule checking the mkgmap:exit_hint=true makes it possible
    to use any routable Garmin type (except 0x08 and 0x09) for the middle 
    part so that the Garmin device tells the name of this middle part as 
    hint where to leave the motorway/trunk. 
        
--delete-tags-file=FILENAME
        Names a file that should contain one or more lines of the form
        TAG=VALUE or TAG=*. Blank lines and lines that start with
        # or ; are ignored. All tag/value pairs in the OSM input are
        compared with these patterns and those that match are deleted.

--tdbfile
        Write files that are essential to running with MapSource, a .tdb file and
        an overview map.

--show-profiles=1
        Sets a flag in tdb file which marks set mapset as having contour 
        lines and allows showing profile in MapSource. Default is 0 
        which means disabled. 

--draw-priority=25
        When two maps cover the same area, this option controls what
        order they are drawn in and therefore which map is on top of
        which.  Higher priorities are drawn "on top" of lower
        priorities.

--transparent
        Make the map transparent, so that if two maps are loaded that
        cover the same area, you can see through this map and see the
        lower map too.  Useful for contour line maps among other
        things.

--poi-address
        Enable address / phone information to POIs. Address info is
        read according to the "Karlsruhe" tagging schema. Automatic
        filling of missing information could be enabled using the
        "location-autofill" option.
        Default is enabled, use --no-poi-address to disable.

--verbose
        Makes some operations more verbose. Mostly used with --list-styles.