[mkgmap-dev] process-exits and Oregon 600
From Gerd Petermann gpetermann_muenchen at hotmail.com on Thu Jun 4 10:47:05 BST 2015
Hi Micha, lines 119 and 120 in lines (r3605) are: highway=motorway_link & (mkgmap:exit_hint=true | mkgmap:dest_hint=true) [0x06 road_class=3 road_speed=2 resolution 20] highway=motorway_link [0x09 road_class=3 road_speed=2 resolution 20] If you change line 119 as suggested the rule in line 120 is never triggered, therefore you will not have a type 0x09 for the motorway_link. Gerd Date: Thu, 4 Jun 2015 11:36:01 +0200 From: micha.lohr at web.de To: mkgmap-dev at lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] process-exits and Oregon 600 Hi Gerd, trying to reproduce the problem with the default style made things clearer. If you change line 119 in "lines" to: highway=motorway_link { name 'generic_exit' } [0x02 road_class=3 road_speed=2 resolution 20] routing hints point to "generic_exit". I did a few more test, and it seems that there's two ways to get proper routing: 1. Make segments 1 & 3 polyline 0x09 (named or not doesn't matter), and segment 2 any type except 0x08 or 0x09 (didn't test that, taken from the documentation) 2. If segments 1 & 3 are not 0x09 then don't name them, and again segment 2 any type except 0x08 or 0x09 Micha Am 04.06.2015 um 09:30 schrieb Gerd Petermann: Hi Micha, it's hard to understand without seeing your complete style. Maybe you can post a link to it? If not, please describe in detail how to reproduce the problem with the default style and give an example route that shows what you get with and without the modification. thanks, Gerd Date: Thu, 4 Jun 2015 09:20:23 +0200 From: micha.lohr at web.de To: mkgmap-dev at lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] process-exits and Oregon 600 Hi Gerd, my style did (in this order) assign hints to exits, and at the very end, assign generic names to all "leftover" unnamed roads. This produced exits in 3 segments named "GENERIC_NAME", "EXIT_HINT", "GENERIC_NAME" - so mkgmap worked just as expected. But: the Oregon now shows "GENERIC_NAME" during routing, not "EXIT_HINT". After removing the generic names from the 1st and the 3rd segment, everything workes fine. So I draw two conclusions from this: Either: mkgmap simly assigns the exit hints to all 3 segments (do we need 3 segments at all, then?), though I don't know what else might be influenced by this Or: documentation needs to be updated concerning the exit_hints Micha Am 04.06.2015 um 09:09 schrieb Gerd Petermann: Hi Micha, now I am no longer sure what you are talking about. You said that your problem was solved by removing the line highway=motorway_link & mkgmap:label:1!=* { set mkgmap:label:1 = 'Exit' } from your style. I tried to find out why this line causes trouble and found no reason as long as the line doesn't appear before the blocks for the hints which start at line 36 in the default style file lines of r3605: (highway=motorway_link | highway=trunk_link) & mkgmap:exit_hint=true & mkgmap:dest_hint=true .... I don't use the device for testing, I create a route in MapSource and check the list of "directions". Gerd Date: Thu, 4 Jun 2015 08:56:37 +0200 From: micha.lohr at web.de To: mkgmap-dev at lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] process-exits and Oregon 600 Hi Gerd, the exits were always named correctly, I checked that by looking directly into the img-files. The GPS just wouldn't display the hint. Am 04.06.2015 um 07:19 schrieb Gerd Petermann: Hi Micha, I cannot yet reproduce your result. I tried this: Add the line highway=motorway_link & mkgmap:label:1!=* { set mkgmap:label:1 = 'Exit' } in the default style file at line 65, before the line highway=* {name '${name}' | '${ref}' } Execute mkgmap with options --route --process-exits --process-destinationand this modified style. I see the right hint for node 988993419. Maybe you placed the line before those for the exit hint? In that case it is clear that the exit hints don't work because those rules use the name action which has no effect when mkgmap:label:1 is already set. If that doesn't help, please provide more details. Gerd Date: Wed, 3 Jun 2015 18:47:00 +0200 From: micha.lohr at web.de To: mkgmap-dev at lists.mkgmap.org.uk Subject: Re: [mkgmap-dev] process-exits and Oregon 600 Hi Gerd, hi Bernd it works because the default style does not name the outer segments (intentionally?). My style treated exits pretty much the same way, with one addition: highway=motorway_link & mkgmap:label:1!=* { set mkgmap:label:1 = 'Exit' } Deleting this line and so not naming the outer segments did the trick. As far as I can tell, line type does not make any difference. Micha Am 03.06.2015 um 18:29 schrieb GerdP: Hi Michael, please check how the default style uses the hint. I think it works fine. Gerd michael lohr wrote Hi Gerd, my 1st assumption was that I set the road_speed too high, and the routing would "jump" overthe 2nd part to the 3rd, 2nd assumption was to use a different line type - changing both things made no difference. Am 03.06.2015 um 17:59 schrieb GerdP: Hi Michael, michael lohr wrote Finally found the reason: my style assigns generic names to unnamed roads, so the segments of a motorway_link were named "GENERIC_NAME", "EXIT_HINT", "GENERIC_NAME". As soon as a name is present on either the 1st or the 3rd segment the Oregon would use this name for routing (btw, contrary the my previous posts: the Oregon 450 also behaves like that). Which brings up this question: why not assign the exit_hint to all 3 segments in the first place? My understanding is that the style should be able to use a different type (not 0x08 / 0x09) for that small 2nd part, so that Garmin uses the name of it as a hint. Gerd -- View this message in context: http://gis.19327.n5.nabble.com/process-exits-and-Oregon-600-tp5845444p5846973.html Sent from the Mkgmap Development mailing list archive at Nabble.com. _______________________________________________ mkgmap-dev mailing list mkgmap-dev at .org http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev at .org http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev -- View this message in context: http://gis.19327.n5.nabble.com/process-exits-and-Oregon-600-tp5845444p5846980.html Sent from the Mkgmap Development mailing list archive at Nabble.com. _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.mkgmap.org.uk/pipermail/mkgmap-dev/attachments/20150604/f8b1f7de/attachment-0001.html>
- Previous message: [mkgmap-dev] process-exits and Oregon 600
- Next message: [mkgmap-dev] process-exits and Oregon 600
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the mkgmap-dev mailing list