[mkgmap-dev] Problem with Exit info while on a BRIDGE

Tue Mar 8 07:10:58 GMT 2016

Hi Greg,

sorry, I can't reproduce the problem. I've done this:

- Create a copy of the default style

- replace the files lines and points with your version

- modifiy your batch file to match my paths and replace --gmapsupp by --nsis to be able to check on the PC

- download a small area around the node on the bridge

- compile the map

Results:

1) The short part of the motorlink is named as expected:

"EXIT 139 M-106 (COOPER ST) – DOWNTOWN JACKSON M106 COOPER ST - DOWNTOWN JACKSON"

(Maybe this is too long for a message, don't know if Garmin devices have a limit here)

2) In Mapsource I've created a route through that way and the hint appears as expected.

Maybe you fixed the problem already ?

Gerd

________________________________
Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag von greg crago <gregcrago at gmail.com>
Gesendet: Dienstag, 8. März 2016 00:59
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] Problem with Exit info while on a BRIDGE

Sorry about that. Here is my line and point files

Greg

On Sun, Mar 6, 2016 at 1:25 PM, Gerd Petermann <GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com>> wrote:

Hi Greg,

we still don't know your style files, so it is hard to reproduce a problem.

Gerd

________________________________
Von: mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk> <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>> im Auftrag von greg crago <gregcrago at gmail.com<mailto:gregcrago at gmail.com>>
Gesendet: Sonntag, 6. März 2016 16:48

An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] Problem with Exit info while on a BRIDGE

Sorry, lost track of this thread, but I would like to find out why my TYP english 0x04 labels are getting used as NAME for my ways. Here is my mkgmap options and my TYP file.

I though it might have been since I moved MOTORWAY linetype to 0x0b and moved BRIDGES to 0x01 (because I wanted to see BRIDGES on top of all other ways, it works). However my motorway_link have the have "Ramp-High speed TRANSPARENT" just like my 0x04 ENGLISH label is defined in my TYP file (master_thin.txt)

Any help will be appreciated.
Greg

On Wed, Feb 17, 2016 at 12:31 PM, Gerd Petermann <GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com>> wrote:

Hi Greg,

I also wonder why this happens. Can't say more without all your input files (style, mkgmap-options )

You may check with GPSMapedit what data mkgmap stores in the img file. If you open the img file with

it and double click on a line it shows the attributes like type, routing data etc.

Despite a few errors  / unsupported features it works well for this.

Gerd

________________________________
Von: mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk> <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>> im Auftrag von greg crago <gregcrago at gmail.com<mailto:gregcrago at gmail.com>>
Gesendet: Mittwoch, 17. Februar 2016 17:26

An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] Problem with Exit info while on a BRIDGE

Yes, "bridge" is in my typ file (attached). I set this linetype to 0x01 so Bridges are drawn on top of all other ways. (Pinns suggested this on his website, and it seems to work)

If I would have kept it 'standard' with "motorway=0x01" then does that mean I would have gotten "motorway" shown on my GPS ?

I am wondering why the linetype 0x01 (0x04 English) string is being displayed at the exit ref, or destination.

Greg

On Wed, Feb 17, 2016 at 2:09 AM, Gerd Petermann <GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com>> wrote:

Hi Greg,

the word doesn't come from mkgmap , so maybe you have it in your typ file ?

I can't say more without knowing your input files.

Gerd

________________________________
Von: mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk> <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>> im Auftrag von greg crago <gregcrago at gmail.com<mailto:gregcrago at gmail.com>>
Gesendet: Mittwoch, 17. Februar 2016 00:15
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] Problem with Exit info while on a BRIDGE

I searched the entire style files for "bridge" using notepad++ and the only instances are in the line file, but it is only when I test the TAG (bridge=yes | bridge!=yes) I do not see any place I have set the 'name' to 'bridge'

Greg

On Tue, Feb 16, 2016 at 12:47 AM, Gerd Petermann <GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com>> wrote:

Hi Greg,

I did not try with the default style, it

sounds like your style sets the name to bridge before these rules are processed ?

Note that the rules will not change that, the action

  { name '${exit_hint} ${dest_hint}' | '${dest_hint}' | '${exit_hint}'}

has no effect when name is already set.

Gerd

________________________________
Von: mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk> <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>> im Auftrag von greg crago <gregcrago at gmail.com<mailto:gregcrago at gmail.com>>
Gesendet: Montag, 15. Februar 2016 22:47
An: Development list for mkgmap
Betreff: [mkgmap-dev] Problem with Exit info while on a BRIDGE

While traveling East on I-94 (in Michigan), my DESCRIPTION TEXT on my GPS ( the Nuvi layout) said "Bridge" when it should have stated "Exit 139"

Example:
https://www.openstreetmap.org/node/184647257
[http://www.openstreetmap.org/assets/osm_logo_256-835a859acf0d378e1d14e88b15e7b4b95211ccd41a2c061b1629cfbbb8deb697.png]<https://www.openstreetmap.org/node/184647257>

OpenStreetMap | Node: 184647257<https://www.openstreetmap.org/node/184647257>
www.openstreetmap.org<http://www.openstreetmap.org>
OpenStreetMap is a map of the world, created by people like you and free to use under an open license.

here is my exit and destination commands from my lines file:

dest_hint=* { delete dest_hint }
(highway=motorway_link | highway=trunk_link | highway=primary_link | highway=secondary_link | highway=tertiary_link) & mkgmap:dest_hint=true
#  { set dest_hint = '${destination:ref|subst: =>} ${destination|subst:;=> |subst:/=> }' |
  { set dest_hint = '${destination:ref|subst: =>|subst: South=> S|subst: North=> N|subst: East=> E|subst: West=> W} ${destination:street|subst: Road=> Rd|subst: Street=> St|subst: Avenue=> Ave|subst: Mile=> Mi|subst: Boulevard=> Blvd|subst: Parkway=> Pkwy|subst: Highway=> Hwy} - ${destination|subst:;=>,|subst:/=>,}' |

         '${destination:street|subst: Road=> Rd|subst: Street=> St|subst: Avenue=> Ave|subst: Mile=> Mi|subst: Boulevard=> Blvd|subst: Parkway=> Pkwy|subst: Highway=> Hwy} - ${destination|subst:;=>,|subst:/=>,}'
'${ref|subst: =>|subst: South=> S|subst: North=> N|subst: East=> E|subst: West=> W} - ${destination|subst:;=>,|subst:/=>,}' |
'${exit_hint_ref|subst: South=> S|subst: North=> N|subst: East=> E|subst: West=> W} ${exit_hint_name|subst: Road=> Rd|subst: Street=> St|subst: Avenue=> Ave|subst: Mile=> Mi|subst: Boulevard=> Blvd|subst: Parkway=> Pkwy|subst: Highway=> Hwy}' |
'${exit_to|subst: Road=> Rd|subst: Street=> St|subst: Avenue=> Ave|subst: Mile=> Mi|subst: Boulevard=> Blvd|subst: Parkway=> Pkwy|subst: Highway=> Hwy}' |
         '${destination|subst:;=>,|subst:/=>,}';
       }
# build exit hint
exit_hint=* { delete exit_hint }
(highway=motorway_link | highway=trunk_link | highway=primary_link | highway=secondary_link | highway=tertiary_link) & mkgmap:exit_hint=true
  { set exit_hint = 'Exit ${mkgmap:exit_hint_ref} ${mkgmap:exit_hint_name|subst: Road=> Rd|subst: Street=> St|subst: Avenue=> Ave|subst: Mile=> Mi|subst: Boulevard=> Blvd|subst: Parkway=> Pkwy|subst: Highway=> Hwy}' |
         'Exit ${ref|subst: South=> S|subst: North=> N|subst: East=> E|subst: West=> W}' |
'Exit ${mkgmap:exit_hint_ref|subst: South=> S|subst: North=> N|subst: East=> E|subst: West=> W} ${mkgmap:exit_hint_exit_to|subst: Road=> Rd|subst: Street=> St|subst: Avenue=> Ave|subst: Mile=> Mi|subst: Boulevard=> Blvd|subst: Parkway=> Pkwy|subst: Highway=> Hwy}' |
         'Exit ${mkgmap:exit_hint_exit_to|subst: Road=> Rd|subst: Street=> St|subst: Avenue=> Ave|subst: Mile=> Mi|subst: Boulevard=> Blvd|subst: Parkway=> Pkwy|subst: Highway=> Hwy}' |
         'Exit ${mkgmap:exit_hint_name|subst: Road=> Rd|subst: Street=> St|subst: Avenue=> Ave|subst: Mile=> Mi|subst: Boulevard=> Blvd|subst: Parkway=> Pkwy|subst: Highway=> Hwy}' |
         'Exit ${mkgmap:exit_hint_ref|subst: South=> S|subst: North=> N|subst: East=> E|subst: West=> W}';
       }

# use destination hint and/or exit hint to build name
(highway=motorway_link | highway=trunk_link | highway=primary_link | highway=secondary_link | highway=tertiary_link) & (mkgmap:exit_hint=true | mkgmap:dest_hint=true)
  { name '${exit_hint} ${dest_hint}' | '${dest_hint}' | '${exit_hint}'}

This only seems to happen when highway=motorway_junction is sitting on a BRIDGE.

Greg

_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev

_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev

_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev

_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mkgmap.org.uk/pipermail/mkgmap-dev/attachments/20160308/a01d2886/attachment-0001.html>