[mkgmap-dev] SCHWERWIEGEND (MapSplitter): Area too small to split at

Sun Jan 15 10:01:14 GMT 2017

Hi Gerd,

you are right, there is more code to add the addr for housenumber 
2,3,4,6,...9,11,...

mkgmap_POI_addr=* & !(addr:housenumber~'.*0' | addr:housenumber~'.*5' | 
addr:housenumber='1') & name!=*
                { add name='${mkgmap_POI_addr}' }                [0x1604 
resolution 24]

If there are any splitter parameter relevant for this error message, I can 
provide that.
Now I am suppressing all adresses that are currently causing this error.

It covers Enschede, Wageningen, Amsterdam, Zaandam, Utrecht, Rotterdam

addr:postcode=7513BH & addr:housenumber~'.*-.*'        { delete 
addr:housenumber }
addr:postcode=6708PG & addr:housenumber~'.*-.*'        { delete 
addr:housenumber }
addr:postcode=6708GA & addr:housenumber~'.*-.*'        { delete 
addr:housenumber }
addr:postcode=6708AK & addr:housenumber~'.*-.*'        { delete 
addr:housenumber }
addr:postcode=6706HC & addr:housenumber~'.*-.*'        { delete 
addr:housenumber }
addr:postcode=1079NR & addr:housenumber~'.*-.*'        { delete 
addr:housenumber }
addr:postcode=1503EE & addr:street=Pharus        { delete addr:housenumber }
addr:postcode=3526WH & addr:street=Europaplein        { delete 
addr:housenumber }
addr:postcode=3526WP & addr:street=Europaplein        { delete 
addr:housenumber }
addr:postcode=3571SM & addr:housenumber~'.*-.*'        { delete 
addr:housenumber }
addr:postcode=3571AD & addr:housenumber~'.*-.*'        { delete 
addr:housenumber }
addr:postcode=3706AA & addr:street='Laan van Vollenhove' {delete 
addr:housenumber }
addr:postcode=3067VM & addr:street='Hendrick Staetsweg'    { delete 
addr:housenumber }
addr:postcode=3024NK & addr:street='Kees van Dongenhof'    { delete 
addr:housenumber }
addr:postcode=3012CC & addr:street='Kruisplein'        { delete 
addr:housenumber }
addr:postcode=3072DB & addr:street='Laan op Zuid'    { delete 
addr:housenumber }
addr:postcode=3032CG & addr:street='Hofdijk'        { delete 
addr:housenumber }

Walter

-----Ursprüngliche Nachricht----- 
From: Gerd Petermann
Sent: Sunday, January 15, 2017 10:03 AM
To: Development list for mkgmap
Subject: Re: [mkgmap-dev] SCHWERWIEGEND (MapSplitter): Area too small to 
split at

Hi Walter,

I tried to reproduce the error messages by adding the rule to points in the 
default style but
(addr:housenumber~'.*0' | addr:housenumber~'.*5' | addr:housenumber='1' | 
addr:unit=* | addr:door=*)
                { name     '${addr:unit}/${addr:door}' |
                      '${addr:housenumber}/${addr:unit}' |
                     '${addr:door}' |
                     '${addr:unit}' |
                     '${addr:housenumber}'}                    [0x1E04 
resolution 24]
that doesn't produce such a large number of POI in a small area. I assume 
you have other rules which add one POI for each of the 271
addr:housenumber nodes near 52.218652 6.881467.

Anyhow, I will try to change the code to avoid that error message.

Gerd

________________________________________
Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag von 
Walter Schlögl <Walter.Schloegl-Resch at aon.at>
Gesendet: Samstag, 14. Januar 2017 19:13:09
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] SCHWERWIEGEND (MapSplitter): Area too small   to 
split at

Hi Gerd,

I am using the housenumber option,
but only if there is a building.

If there is an addr tag without building
I want to see every 5th housenumber directly in the map without clicking
and the other numbers as hidden POI with 1x1 pixel,
so that I can show the number with clicking.

Walter

-----Ursprüngliche Nachricht-----
From: Gerd Petermann
Sent: Saturday, January 14, 2017 6:32 PM
To: Development list for mkgmap
Subject: Re: [mkgmap-dev] SCHWERWIEGEND (MapSplitter): Area too small to
split at

Hi Walter,

thanks for the feedback. I am using Windows, but all my favorite tools are
able to handle unix style,
so I never noticed.
I wonder why you create those POI, is the --hosuenumbers option not working
for you?

Gerd
________________________________________
Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag von
Walter Schlögl <Walter.Schloegl-Resch at aon.at>
Gesendet: Samstag, 14. Januar 2017 18:24:07
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] SCHWERWIEGEND (MapSplitter): Area too small   to
split at

Hi Gerd,

many thanks, the logfile looks much better now with the windows EOL style.
It seems, that not so many mkgmap users are using windows,
otherwise this would have been found much earlier.

I am now working on a supressions of those many adresses at the same place.
It looks as if somebody has tagged every door on every level of these
buildings.

Walter

-----Ursprüngliche Nachricht-----
From: Gerd Petermann
Sent: Saturday, January 14, 2017 11:21 AM
To: Development list for mkgmap
Subject: Re: [mkgmap-dev] SCHWERWIEGEND (MapSplitter): Area too small to
split at

Hi Walter,

okay, now I understand. All messages produced with the logger have unix
style endings, while
"normal" messages produced with system.out.* have the system dependent line
endings.
I've found one place in UsefullFormatter which used a hard coded '\n' and
changed that in r3753.
Hope that fixes this problem.

Gerd

________________________________________
Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag von
Walter Schlögl <Walter.Schloegl-Resch at aon.at>
Gesendet: Samstag, 14. Januar 2017 10:44:18
An: Development list for mkgmap
Betreff: Re: [mkgmap-dev] SCHWERWIEGEND (MapSplitter): Area too small to
split at

Hi Gerg,

I am using the command 2>>Filename.txt

Since all other lines in this file are having the correct cr-lf end
and only these lines are having the unix lf end without cr
I am sure that the command itself is working correct
and mkgmap is generating the wrong line end for this message.

Yes, I am generating a POI for every 5th addr tag.
At these places there are nearly hundred of addr tags at the same location.
I could identify these 18 places and suppress only those addr tags,
but I would prefer a more general solution if there is one.

This command generates visible addr POIs for the housenumbers 1, 5, 10, 15,
20, ....
but only, if there is no building.

(addr:housenumber~'.*0' | addr:housenumber~'.*5' | addr:housenumber='1' |
addr:unit=* | addr:door=*)
                { name     '${addr:unit}/${addr:door}' |
                      '${addr:housenumber}/${addr:unit}' |
                     '${addr:door}' |
                     '${addr:unit}' |
                     '${addr:housenumber}'}                    [0x1E04
resolution 24]

If there is a building, it will get the addr via --poi-address.

Walter

-----Ursprüngliche Nachricht-----
From: Gerd Petermann
Sent: Saturday, January 14, 2017 7:36 AM
To: Development list for mkgmap
Subject: Re: [mkgmap-dev] SCHWERWIEGEND (MapSplitter): Area too small to
split at

Hi Walter,

hmm, all log messages are written with the same routine, each message is one
line,
and they should all have the correct line ending.
When you say logfile, is that the output written to stderr or do you use
java option
like -Dlog.config=logging.properties to configure the details?
See http://wiki.openstreetmap.org/wiki/Mkgmap/dev#Enabling_Debugging
for more info about that.
If you use a command like  this
java -jar mkgmap.jar .... > mkgmap.log 2>mgkmap.err
the two files mkgmap.log and mkgmap.err should also have cr-lf style.

Reg. the message itself : It seems that your style genenrates a POI for each
of the 271 addr:xxx
nodes in this area. I think the algo in MapSplitter can be changed to handle
that. Will try that later.

Gerd

________________________________________
Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag von
Walter Schlögl <Walter.Schloegl-Resch at aon.at>
Gesendet: Freitag, 13. Januar 2017 23:37:12
An: Development list for mkgmap
Betreff: [mkgmap-dev] SCHWERWIEGEND (MapSplitter): Area too small to split
at

If there are too many address tags (or maybe also other tags) mkgmap
generates a lot of error messages.
For all these error messages the <CR><LF> is missing at the end, if it runs
under windows.
Would it be possible to add the correct EOL chars so that the logfile keeps
it's readability?
All other messages outputted with echo are having a correct <CR><LF> at the
end.

If anybody has a solution how to reduce these errors it would also be
helpfull.
Here are the areas I have found in my logfile.

SCHWERWIEGEND (MapSplitter): 50120092.o5m: Area too small to split at
http://www.openstreetmap.org/?mlat=52.218511&mlon=6.881390&zoom=17 (reduce
the density of points, length of lines, etc.)
SCHWERWIEGEND (MapBuilder): 50120092.o5m: Too many POIs at location
http://www.openstreetmap.org/?mlat=52.218554&mlon=6.881454&zoom=17 - 210-901
Emmastraat will be ignored
...

More areas are in attached logfile excerpt.

Walter
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev

_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev

_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev

_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev at lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev 