[mkgmap-dev] type/subtype of points and cities

Tue Nov 5 16:22:38 GMT 2019

Hi Gerd

cityPtrSize exists twice in MdrDisplay. 

It is a global, based on the number of records on MDR5, and rounded up
to 2. This is used by MDR11 as for the list of city offsets.

Mdr5, the list of cities, has its own cityPtrSize from the magic number
in the Mdr5 header. The extra check I put in was a message if this size
wasn't 2 or 3, and I couldn't see a good way of outputting messages in
the Displayer context.

Otherwise I left this area alone

Ticker

On Tue, 2019-11-05 at 13:47 +0000, Gerd Petermann wrote:
> Hi Ticker,
> 
> the code in MdrDisplay sets cityPtrSize to either 2 or 3, so maybe
> perform the test once in printHeader() using the logger instead of
> System.out.printf()?
> 
> Gerd
> 
> ________________________________________
> Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag
> von Ticker Berkin <rwb-mkgmap at jagit.co.uk>
> Gesendet: Dienstag, 5. November 2019 12:44
> An: mkgmap development
> Betreff: Re: [mkgmap-dev] type/subtype of points and cities
> 
> Hi Gerd
> 
> Here is patch for Display.
> 
> Changes are:
>   Couple of extra diagnostics.
>   Handles 1 byte cities.
>   Moves a call of getSection(11).get... out of a loop.
>   Consistent handling/display of point type/subtype.
>   Understands the same MDR groups as generated by mkgmap so
>     it can recreate the correct full type.
> 
> Ticker
> 
> On Tue, 2019-11-05 at 09:43 +0000, Gerd Petermann wrote:
> > Hi Ticker,
> > 
> > okay, looks good to me. In an earlier post you mentioned that
> > display
> > tool needs changes, too. Please post that patch as well.
> > 
> > Gerd
> > 
> > ________________________________________
> > Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag
> > von Ticker Berkin <rwb-mkgmap at jagit.co.uk>
> > Gesendet: Montag, 4. November 2019 18:12
> > An: Development list for mkgmap
> > Betreff: Re: [mkgmap-dev] type/subtype of points and cities
> > 
> > Hi Gerd
> > 
> > To stay compatible with "Openfietsmap full" style, I've updated the
> > patch to change the range of city to be:
> >   type >= 0x0100 && type < 0x1100;
> > Release mkgmap had this as:
> >   type >= 0x0100 && type <= 0x1100;
> > 
> > In release mkgmap, a point with value 0x1100 was added to the RGN
> > as
> > an
> > indPoint, but not indexed as a city by MDR. Also 0x1100 is not
> > findable
> > as a nearby city, at least on Garmin eTrex. I couldn't detect any
> > useful behaviour for this combination.
> > 
> > Ticker
> > 
> > On Tue, 2019-10-22 at 15:03 +0000, Gerd Petermann wrote:
> > > Hi Minko,
> > > 
> > > "(like you say)" should have been ... "(like Ticker wrote)"
> > > ... (a small dot with the label) ...
> > > sorry, I forgot to use the typ file, so 0x1101 is displayed with
> > > an
> > > icon showing a bus and without the label.
> > > But why do you use a type that is not indexed?
> > > 
> > > Gerd
> > > 
> > > ________________________________________
> > > Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im
> > > Auftrag
> > > von Gerd Petermann <gpetermann_muenchen at hotmail.com>
> > > Gesendet: Dienstag, 22. Oktober 2019 16:52
> > > An: Development list for mkgmap
> > > Betreff: Re: [mkgmap-dev] type/subtype of points and cities
> > > 
> > > Hi Ticker,
> > > 
> > > thanks.
> > > 
> > >  @Minko:
> > > I've created a small map with "Openfietsmap full" style and trunk
> > > r4315 , OSM data contains an amenity=bus_station.
> > > The result is that this POI appears in the map (a small dot with
> > > the
> > > label), but it is not in the mdr (like you say).
> > > I found no older versions of mkgmap where this would have worked
> > > different, so it seems useless to me because normally I'd want to
> > > be
> > > able to find the bus station under transport services.
> > > 
> > > Why do you use 0x1101, 0x1102, or 0x1108 for POI?
> > > 
> > > Gerd
> > > 
> > > ________________________________________
> > > Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im
> > > Auftrag
> > > von Ticker Berkin <rwb-mkgmap at jagit.co.uk>
> > > Gesendet: Dienstag, 22. Oktober 2019 16:29
> > > An: Development list for mkgmap
> > > Betreff: Re: [mkgmap-dev] type/subtype of points and cities
> > > 
> > > Hi Gerd
> > > 
> > > The old reader/osm/Gtype:checkType() didn't diagnose cities
> > > (however
> > > they might be defined) with non-zero subtypes - this is where the
> > > new
> > > message comes from.
> > > 
> > > Old general/MapPoint:isCity[Type] defined city as:
> > > 
> > >         return type >= 0x0100 && type <= 0x1100
> > > 
> > > ie 0x1100 is city, 0x1101 isn't, which I thought wasn't a good
> > > definition, so I changed it to:
> > > 
> > >         return type >= 0x0100 && type < 0x1200;
> > > 
> > > I chose all of 0x11XX to be considered cities so that 0x1100
> > > processing
> > > as a city didn't change (this and 0x1000 were put into RGN
> > > indPoints,
> > > but were not indexed as cities by MDR)
> > > 
> > > Changing it to < 0x1100 would be reasonable, because the device
> > > range
> > > seems to be < 0x0e00 and MDR5 city indexing was for points <
> > > 0x1000
> > > 
> > > Ticker
> > > 
> > > On Tue, 2019-10-22 at 12:32 +0000, Gerd Petermann wrote:
> > > > Hi Ticker,
> > > > 
> > > > I see some new warnings for Minkos popular Openfietsmap styles
> > > > with
> > > > this patch:
> > > > checking style: Openfietsmap full
> > > > Warning: invalid type 0x1101 for POINT in style file points,
> > > > line
> > > > 97
> > > > Warning: invalid type 0x1102 for POINT in style file points,
> > > > line
> > > > 263
> > > > Warning: invalid type 0x1102 for POINT in style file points,
> > > > line
> > > > 264
> > > > Warning: invalid type 0x1108 for POINT in style file points,
> > > > line
> > > > 336
> > > > Warning: invalid type 0x1108 for POINT in style file points,
> > > > line
> > > > 348
> > > > Warning: invalid type 0x1108 for POINT in style file points,
> > > > line
> > > > 349
> > > > Warning: invalid type 0x1108 for POINT in style file points,
> > > > line
> > > > 350
> > > > 
> > > > The corresponding lines in the points file
> > > > amenity=bus_station [0x1101 resolution 24 continue]
> > > > railway=halt [0x1102 resolution 22]
> > > > railway=station [0x1102 resolution 20-23 continue]
> > > > (barrier=bollard | barrier=bus_trap | barrier=block) [0x1108
> > > > resolution 23]
> > > > access:conditional=* & access:conditional ~
> > > > '!(sunset|sunrise|destination)' & bicycle!=no &
> > > > bicycle!=permissive
> > > > &
> > > > vehicle!=no { name 'access=${access:conditional}' } [0x1108
> > > > resolution 24]
> > > > bicycle:conditional=* & bicycle:conditional ~
> > > > '!(sunset|sunrise|destination)' { name
> > > > 'bicycle=${bicycle:conditional}' } [0x1108 resolution 24]
> > > > vehicle:conditional=* & vehicle:conditional ~
> > > > '!(sunset|sunrise|destination)' { name
> > > > 'vehicle=${vehicle:conditional}' } [0x1108 resolution 24]
> > > > 
> > > > Can you explain what happened with those POI without the patch?
> > > > 
> > > > Gerd
> > > > 
> > > > ________________________________________
> > > > Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im
> > > > Auftrag
> > > > von Ticker Berkin <rwb-mkgmap at jagit.co.uk>
> > > > Gesendet: Dienstag, 22. Oktober 2019 13:07
> > > > An: Development list for mkgmap
> > > > Betreff: Re: [mkgmap-dev] type/subtype of points and cities
> > > > 
> > > > Hi Gerd
> > > > 
> > > > Here is the patch based on the current trunk
> > > > 
> > > > Ticker
> > > > On Tue, 2019-04-23 at 11:51 +0100, Ticker Berkin wrote:
> > > > > Hi
> > > > > 
> > > > > I think the mkgmap internal handling of types/subtypes of
> > > > > points
> > > > > is
> > > > > obscure.
> > > > > 
> > > > > In the points style file, the type code is always full, ie
> > > > > type
> > > > > <<
> > > > > 8
> > > > > > 
> > > > > subtype, but when the points are read back from the RGN file
> > > > > for
> > > > > the
> > > > > MDR processing, the representation is the same provided the
> > > > > subtype
> > > > > is
> > > > > not zero, otherwise it is just type! Logic then decides that
> > > > > if
> > > > > the
> > > > > value is <= 0xff it is because the subtype is zero.
> > > > > 
> > > > > It is simpler and much clearer to preserve the original
> > > > > representation.
> > > > > This also allows unambiguous use of type 0 with subtypes,
> > > > > and,
> > > > > possibly, city with subtypes.
> > > > > 
> > > > > It also allows the same function to be used to test a type
> > > > > for
> > > > > being
> > > > > in
> > > > > the 'city' range, regardless of the context. mkgmap wasn't
> > > > > consistent
> > > > > the ranges for the isCity test.
> > > > > 
> > > > > City POI are written in a different manner to the RGN file.
> > > > > The
> > > > > old
> > > > > range for this was:
> > > > >   type >= 0x0100 && type <= 0x1100
> > > > > which I've kept, except changing to: ...& type < 0x1200. A
> > > > > similar
> > > > > range was used for MDR5.
> > > > > 
> > > > > However, city POI are held in group 1 of MDR 9/10. This is
> > > > > used
> > > > > in
> > > > > Find
> > > > > > City 'By Name'. The old range was: type <= 0xf, where, if
> > > > > > the
> > > > > > subtype
> > > > > was zero, type is right shifted by 8 (see above), non-zero
> > > > > subtypes
> > > > > messed up the testing. Now it uses the same range as above.
> > > > > 
> > > > > Actually neither of these ranges are correct for my Garmin
> > > > > devices.
> > > > > Find > City show nearby POI with types in the range
> > > > > 0x0100..0x0d1f,
> > > > > regardless of the img RGN or MDR. The eTrex Legend labels
> > > > > POIs
> > > > > in
> > > > > this
> > > > > range as {Large/Medium/Small} City/Town and points in the
> > > > > range
> > > > > 0x0e00..0x111f as "*".
> > > > > 
> > > > > Find > City 'by-name' returns POI if in group 1 of MDR 9/10.
> > > > > I
> > > > > find
> > > > > it
> > > > > a useful feature to have a POI that can be searched for but
> > > > > doesn't
> > > > > flood the list of nearby points.
> > > > > 
> > > > > Generally, non-zero subtypes for cities cause problems in the
> > > > > RGN
> > > > > structure and I've added a test for this to the style
> > > > > validation.
> > > > > 
> > > > > There is also a fix to --make-poi-index, but I can't detect
> > > > > any
> > > > > effect
> > > > > of this option.
> > > > > 
> > > > > This patch won't make any difference to the img output unless
> > > > > the
> > > > > there
> > > > > are points 0x1000, 0x1100.
> > > > > 
> > > > > If this patch is accepted, I'll do the equivalent to the img
> > > > > display
> > > > > system.
> > > > > 
> > > > > Regards
> > > > > Ticker
> > > > > _______________________________________________
> > > > > mkgmap-dev mailing list
> > > > > mkgmap-dev at lists.mkgmap.org.uk
> > > > > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
> > > > _______________________________________________
> > > > mkgmap-dev mailing list
> > > > mkgmap-dev at lists.mkgmap.org.uk
> > > > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
> > > _______________________________________________
> > > mkgmap-dev mailing list
> > > mkgmap-dev at lists.mkgmap.org.uk
> > > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
> > > _______________________________________________
> > > mkgmap-dev mailing list
> > > mkgmap-dev at lists.mkgmap.org.uk
> > > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
> > > _______________________________________________
> > > mkgmap-dev mailing list
> > > mkgmap-dev at lists.mkgmap.org.uk
> > > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev