[mkgmap-dev] Pending changes
From jan meisters jan_m23 at gmx.net on Fri Feb 12 09:52:51 GMT 2021
Hi Ticker, in fact 3200 - 3f1f strictly follow their given resolution value - other than e.g. 2a-2f, which only appear at kind of 24+, no matter what resolution is given. Even if both ranges are styled to resolution 24: 2a-2f will always appear a bit later. I suspect that´s what Gerd found to be confusing. Jan > Am 12.02.2021 um 09:46 schrieb Ticker Berkin <rwb-mkgmap at jagit.co.uk>: > > Hi Gerd > > The "points" barriers use 0x3200 and I only see these when I > "overzoom". I think I configured the device Map Detail levels and Text > sizes to get it how I wanted. > > I find them useful when walking and sometimes useful for choosing an > end-point for car navigation or seeing why a route hasn't been chosen. > > "lines" barriers (wall/ditch/etc) again I find useful when walking. > > Either of these can commented out by users making their own style > starting from default. When I started, the first thing I had to remove > were all the low-level administrative boundaries, but I think it right > that they are in the default style. > > I'd rather not start on other changes until this lot is out of the way. > > Ticker > > On Thu, 2021-02-11 at 15:27 +0000, Gerd Petermann wrote: >> Hi Ticker, >> >> while you are at it: I see lots of rather confusing texts like "gate" >> or "lift_gate" popping up in the map on my Oregon. I think they might >> be useful for mappers but they are not very useful for the normal >> user. Maybe it is only on my device but I don't see any need for >> this. >> >> Gerd >> >> ________________________________________ >> Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag >> von Ticker Berkin <rwb-mkgmap at jagit.co.uk> >> Gesendet: Donnerstag, 11. Februar 2021 15:57 >> An: Development list for mkgmap >> Betreff: Re: [mkgmap-dev] Pending changes >> >> Hi all >> >> I've re-made this set of changes, along with a few improvements that >> I've gathered over the last 6 months. Following list numbering is the >> same as original patch, but include some [extra] notes + new items at >> the end. >> >> Relevant threads: >> http://www.mkgmap.org.uk/pipermail/mkgmap-dev/2020q3/031375.html >> http://www.mkgmap.org.uk/pipermail/mkgmap-dev/2020q3/031424.html >> >> 1/ Sometimes charges for using a pedestrian highway are expressed as >> a >> fee rather than a toll, so pick this up in mkgmap:toll. >> >> 2/ Show bridges using type 0x10107. With the mapnik addition, these >> look good for narrow highways, but might not show for wide >> representations like motorways. >> >> 3/ Where it is likely that bits of highway might not be connected to >> the road/path system, use mkgmap:set_unconnected_type and >> mkgmap:set_semi_connected_type to stop the NET/NOD rather than >> relying >> on NETnoNOD (now disabled) and --check-routing-island-len=+ve, which >> is >> being suspected of causing problems on some devices and BaseCamp. >> >> [extra] In all cases where unconnected/semi-connected changes are >> mentioned, this only applies to lines not derived from an >> original/OSM >> standard highway. >> >> 4/ Quote some filter subst strings that contain spaces - no actual >> effect but clearer and safer. >> >> 5/ Have line for leisure=track even if area. >> >> 6/ Change the type for tracks/raceways etc from 0x30, which doesn't >> show on BaseCamp or MapSource, to 0x2a. >> >> 7/ For piers, if 'unconnecting', use marine type 0x1040c >> (Obstruction: >> Pier or Jetty) instead of footway. >> >> 8/ Change type for the various barriers from 0x17, which doesn't show >> on BaseCamp to 0x2b, see: >> http://www.mkgmap.org.uk/pipermail/mkgmap-dev/2020q1/030348.html >> >> 9/ Consider natural=cliff a barrier. >> >> 10/ Add motorway[_link] roundabouts (yes, some do exist). >> >> 11/ Unquote some numbers - no actual effect. >> >> 12/ Tweak some road speeds. >> [extra] A few more tweaked. >> >> 13/ Use 0x09 (high-speed ramp) for road class 4 links >> >> 14/ Add footway around car parks if 'connecting'. >> [extra] This change is disabled. >> >> 15/ Disable coastline. For a long time the tag was suppressed by the >> Sea processing and it adds little to the map. >> >> 16/ Improve railway platform names and suppress footway if not >> 'connecting'. >> >> 17/ Show disused:railway in the same way as railway=disused. >> >> 18/ Have cable_car, gondola, funicular as routable, by default with a >> toll and pedestrian only. >> >> 19/ Show "Course of old Railway", unless a highway has taken over the >> way (for you Eric, but I like it as well). >> [extra] This change is disabled >> >> 20/ Speed up car ferries. >> >> 21/ A few other layout/space fixes. >> >> Additional changes: >> >> 22/ motorroad=yes just sets mkgmap:fast_road, which generally >> increases >> the speed/class of the highway and decreases the resolution >> >> 23/ natural=landslide like other barriers (eg cliff) >> >> 24/ Don't generate (routable) line for highway=unclassified & >> area=yes; >> there are many instances in OSM where this is used to draw a polygon >> around a complex junction. >> >> 25/ Change the bridleway from 0x07 (Alley) to 0x16 (Trail) >> >> 26/ For ferry/platform/aerialway, blank out address fields to prevent >> it getting into the Address index >> >> 27/ Add comment about colour pallet to mapnik.txt >> >> Patch attached >> >> Ticker >> >> On Tue, 2021-02-09 at 11:30 +0100, Carlos Dávila wrote: >>> On [1] Ticker proposed a set of changes to default style lines >>> file. >>> There was a long discussion about point #14, which ended without a >>> consensus. Other changes didn't get any objection, but they didn't >>> get >>> into trunk. I agree with numbers 1, 6, 8, 10, 15, 17, 18. Also with >>> 7 >>> and 16, but for unconnected ways only, see #3. >>> >>> 2: more codes could be added for wider highways and their >>> corresponding >>> entries in mapnik.txt >>> >>> 3: not sure about this one, specially about semi-connected ways, >>> which I >>> think should remain as routable (also applies for 7, 16). >>> >>> [1] >>> http://www.mkgmap.org.uk/pipermail/mkgmap-dev/2020q3/031375.html >>> >>> _______________________________________________ >>> mkgmap-dev mailing list >>> mkgmap-dev at lists.mkgmap.org.uk >>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev >> _______________________________________________ >> mkgmap-dev mailing list >> mkgmap-dev at lists.mkgmap.org.uk >> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > _______________________________________________ > mkgmap-dev mailing list > mkgmap-dev at lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
- Previous message: [mkgmap-dev] Pending changes
- Next message: [mkgmap-dev] Pending changes
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the mkgmap-dev mailing list