[mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points
From Gerd Petermann gpetermann_muenchen at hotmail.com on Fri May 7 15:48:18 BST 2021
Hi all, I found a few glitches with v4 of the patch. A code block was duplicated (just decreased performance) and the calculation of points where only two roads meet was wrong. Attached are now two different versions, both probably a bit faster: -v5 corrects the calculation, so probably merges fewer roads than v4 -v6 merges always and produces an info message when sharp angles were merged (the reported number can be confusing: 180 means a u-turn, anything > 130 is a sharp angle) If anybody thinks that reversing should not be done yet I can split the patch so that only the sharp-angle handling changes. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag von Felix Hartmann <extremecarver at gmail.com> Gesendet: Freitag, 7. Mai 2021 15:39 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points I think merging would be fine. Garmin hates sharp angles anyhow and will likely not chose them for a car route. And if cycling or walking it doesn't matter too much if really an announcement is not given. Anyhow on sharp turns there is usually a turn announcement also on the same road - most switchbacks on trails are announced. Would be great if the penalty this way could be lowered a bit.. On Fri, 7 May 2021 at 16:35, Mike Baggaley <mike at tvage.co.uk<mailto:mike at tvage.co.uk>> wrote: Hi Gerd, I believe this activity is a precursor to reducing zig zags at low resolutions (though I may be confusing two different activities). I think the case shown here would be better handled by seeing whether at the low resolution the two entry points to the A13 can be reduced to a single point. For each side of the junction we would have two coincident one-way roads that could be reduced to a single two way road. Merging the two one-way roads into one would prevent this from taking place. I was under the impression that mkgmap split ways at junctions anyway, so I'm not sure what would be gained by joining these together. I do not have a full understanding of the code, so may have misunderstood this bit. Cheers, Mike -----Original Message----- From: Gerd Petermann [mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>] Sent: 07 May 2021 08:55 To: Development list for mkgmap <mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>> Subject: Re: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points Hi all, See e.g. the link roads which meat at https://www.openstreetmap.org/node/606366325 I really wonder how mkgmap should treat roads like that which build a sharp angle. Current code doesn't merge them. I don't know how it worked in 2014 but today I see no good reason for that. Routing results seem to be the same and mainly depend on the "avoid u-turn" setting. Maybe there is a difference when the --ignore-sharp-angles is used, but than that's probably exactly what the user wants? I've also seen several places where the two link roads are mapped with a single OSM way. The correct mapping probably requires two OSM ways and a turn restriction, but the Garmin routing algo really doesn't like sharp angles anyway and prefers large detours to avoid them when "avoid u-turn" is enabled. I've attached a new patch which ignores sharp angles where only two roads meet. This gives a few more merges. If you change the line private static final double MAX_MERGE_ANGLE = 130.0; to private static final double MAX_MERGE_ANGLE = 180.0; mkgmap will still prefer to merge the roads with the smallest angle but will also merge those with a sharp angle and thus reduce the NOD/NET size even more. I think mkgmap should use always merge if --ignore-sharp-angles is used, but that's not implemented yet. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>> im Auftrag von Gerd Petermann <gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>> Gesendet: Freitag, 7. Mai 2021 07:39 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points Hi Felix, just noticed that patch v3 still only looked for mkgmap:has-direction=1 in one place. Anyway, I am very unsure how to handle the direction flag. It's probably not a good idea to transfer the flag too ALL lines which are created from one OSM way. I also found some cases where roads are not merged because the angle is too sharp. This was discussed here:http://www.mkgmap.org.uk/pipermail/mkgmap-dev/2013q3/018649.html I think it was introduced to avoid bad routing at places like https://www.osm.org/node/606366325 where we don't want to merge the two link roads. I think the angle should be ignored if only two roads with the same attributes meat. Like here: https://www.osm.org/node/1387136827 Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>> im Auftrag von Felix Hartmann <extremecarver at gmail.com<mailto:extremecarver at gmail.com>> Gesendet: Donnerstag, 6. Mai 2021 17:55 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points ah okay, no worries I can patch it myself. On Thu, 6 May 2021 at 23:46, Gerd Petermann <gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>>> wrote: Hi Felix, the patch possibly has an influence on routing, so I don't want to add it to the low-res-opt branch. I can provide two binaries if needed. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgm<mailto:mkgmap-dev-bounces at lists.mkgm> ap.org.uk<http://ap.org.uk>>> im Auftrag von Felix Hartmann <extremecarver at gmail.com<mailto:extremecarver at gmail.com><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>>> Gesendet: Donnerstag, 6. Mai 2021 17:42 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points Could you directly push those patches to the low-res branch? I guess anyone using it right now would like to try it with the patch.. I will try it out tomorrow. On Thu, 6 May 2021 at 18:32, Gerd Petermann <gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>><mai lto:gpetermann_muenchen at hotmail.com<mailto:lto%3Agpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>>> > wrote: Ahh, sorry, merge-roads-reversed-v2.patch was work-in-progress. v3 works as described before. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgm<mailto:mkgmap-dev-bounces at lists.mkgm> ap.org.uk<http://ap.org.uk>><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-b<mailto:mkgmap-dev-b> ounces at lists.mkgmap.org.uk<mailto:ounces at lists.mkgmap.org.uk>>>> im Auftrag von Gerd Petermann <gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>><mai lto:gpetermann_muenchen at hotmail.com<mailto:lto%3Agpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>>> > Gesendet: Donnerstag, 6. Mai 2021 12:30 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points Hi all, here is the 2nd approach: RoadMerger can connect more roads if direction of the roads doesn't matter reg. routing. Problem is that mkgmap doesn't know if direction matters unless the oneway tag says so. The patch - implements new special tag mkgmap:has-direction=true which must be set for ways which shoud not be reversed. I am not yet sure how to use this. My idea was that the style author knows which types are direction depended and this should add mkgmap:has-direction=true for those lines which should not be reversed. Before road merging all map lines which were created for a given OSM way are checked. If any has a direction then all lines for the given OSM way are marked to have a direction. Maybe this needs more thinking. - The program checks if there is any line rule that uses mkgmap:has-direction=true. If not, mkgmap will not reverse roads for better merging. - implement new experimental option --x-force-reverse-merge to override the logic reg. mkgmap:has-direction=true. Reg. size the patch is probably not worth the effort. It just merges a few more roads (I see maybe 3% more merges) and thus safes some KB in NET and NOD. I see this also as a preparation to do more merging in the low-res-opt branch. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgm<mailto:mkgmap-dev-bounces at lists.mkgm> ap.org.uk<http://ap.org.uk>><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-b<mailto:mkgmap-dev-b> ounces at lists.mkgmap.org.uk<mailto:ounces at lists.mkgmap.org.uk>>>> im Auftrag von Gerd Petermann <gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>><mai lto:gpetermann_muenchen at hotmail.com<mailto:lto%3Agpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>>> > Gesendet: Mittwoch, 5. Mai 2021 16:53 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points Hi Felix, the patch contained two bugs: - Roads with different direction are not merged when they are connected at the beginning. - angle calculation was wrong, maybe that rejected possible merges or did the worse ones. When I talk about overlays I mean those lines which are created with the continue statement or with overlays rules. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgm<mailto:mkgmap-dev-bounces at lists.mkgm> ap.org.uk<http://ap.org.uk>><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-b<mailto:mkgmap-dev-b> ounces at lists.mkgmap.org.uk<mailto:ounces at lists.mkgmap.org.uk>>>> im Auftrag von Felix Hartmann <extremecarver at gmail.com<mailto:extremecarver at gmail.com><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>><mailto:extremecarve<mailto:extremecarve> r at gmail.com<mailto:r at gmail.com><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>>>> Gesendet: Mittwoch, 5. Mai 2021 16:46 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points If the direction of a line is changed, will all lines created via continue also be changed? If yes then this decreases the lines a lot where I would need the special tag. If not it will get complicated... Well and the patch itself so far only saved about 0.3% of total map size. Better than nothing for no visual impact of course. On Wed, 5 May 2021 at 22:43, Gerd Petermann <gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>><mai lto:gpetermann_muenchen at hotmail.com<mailto:lto%3Agpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com>>> <mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.c<mailto:gpetermann_muenchen at hotmail.c> om><mailto:gpetermann_muenchen at hotmail.com<mailto:gpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmai<mailto:gpetermann_muenchen at hotmai> l.com<http://l.com>>>>> wrote: Hi Felix, no idea why you talk about waterways here. The thread is about a patch for RoadMerger. As the name suggest this code merges roads, nothing else. RoadMerger considers far more attributes of lines compared to the simple LineMerger, not just the type and name but also all the attributes which affect routing. It will not merge oneways with opposite direction, nor does it merge roads which are used in restrictions. My current approach is to implement the new special mkgmap:has-direction=true If the style sets this for a road or any of its overlay lines RoadMerger should not reverse the road. Gerd ________________________________________ Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgm<mailto:mkgmap-dev-bounces at lists.mkgm> ap.org.uk<http://ap.org.uk>><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-b<mailto:mkgmap-dev-b> ounces at lists.mkgmap.org.uk<mailto:ounces at lists.mkgmap.org.uk>>><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk><m ailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:ailto%3Amkgmap-dev-bounces at lists.mkgmap.org.uk>><mailto:mkgmap-dev-bounces at list<mailto:mkgmap-dev-bounces at list> s.mkgmap.org.uk<http://s.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk<mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>>>>> im Auftrag von Felix Hartmann <extremecarver at gmail.com<mailto:extremecarver at gmail.com><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>><mailto:extremecarve<mailto:extremecarve> r at gmail.com<mailto:r at gmail.com><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>>><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>< mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com><mailto:extrem<mailto:extrem> ecarver at gmail.com<mailto:ecarver at gmail.com>>>>> Gesendet: Mittwoch, 5. Mai 2021 13:04 An: Development list for mkgmap Betreff: Re: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points Actually when I think about it - reversing the direction for waterways should be done anyhow - there is no waterway that flows in opposite direction. Cliff lines most likely the same. And for lines that are off center - that doesn't matter as long as all resulting lines are reversed. It would actually be better as otherwise at one point the right side jumps to the left and this could be prevented. Yes oneway roads (plus all copies created from it via continue) - those you cannot merge. On Wed, 5 May 2021 at 18:47, Felix Hartmann <extremecarver at gmail.com<mailto:extremecarver at gmail.com><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>><mailto:extremecarve<mailto:extremecarve> r at gmail.com<mailto:r at gmail.com><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>>><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>< mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com><mailto:extrem<mailto:extrem> ecarver at gmail.com<mailto:ecarver at gmail.com>>>><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com><mailto:extremecarver at gma<mailto:extremecarver at gma> il.com<http://il.com>><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>>><mail to:extremecarver at gmail.com<mailto:to%3Aextremecarver at gmail.com><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>><mailto:extremecar<mailto:extremecar> ver at gmail.com<mailto:ver at gmail.com><mailto:extremecarver at gmail.com<mailto:extremecarver at gmail.com>>>>>> wrote: will that patch also work on the low resolution branch, or only against trunk? On Wed, 5 May 2021 at 18:05, Gerd Petermann <GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com><mailto:GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com>><mai lto:GPetermann_muenchen at hotmail.com<mailto:lto%3AGPetermann_muenchen at hotmail.com><mailto:GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com>>> <mailto:GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com><mailto:GPetermann_muenchen at hotmail.c<mailto:GPetermann_muenchen at hotmail.c> om><mailto:GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com><mailto:GPetermann_muenchen at hotmai<mailto:GPetermann_muenchen at hotmai> l.com<http://l.com>>>><mailto:GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com><mailto:GPetermann_muenchen at h<mailto:GPetermann_muenchen at h> otmail.com<http://otmail.com>><mailto:GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com><mailto:GPetermann_muenche<mailto:GPetermann_muenche> n at hotmail.com<mailto:n at hotmail.com>>><mailto:GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com><mailto:GPetermann_mue<mailto:GPetermann_mue> nchen at hotmail.com<mailto:nchen at hotmail.com>><mailto:GPetermann_muenchen at hotmail.com<mailto:GPetermann_muenchen at hotmail.com><mailto:GPetermann_<mailto:GPetermann_> muenchen at hotmail.com<mailto:muenchen at hotmail.com>>>>>> wrote: Hi all, up to now RoadMerger doesn't merge (combine) two roads if the have different directions. This is OK for oneway roads but I see no need for this with other roads. The attached patch changes this. It has an influence on file size (safes a few KB in each tile) and very likely also on routing, hopefully to the better/faster. It also reduces zig-zagging in the low-res-opt branch. Strangely enough almost all was already implemented, so maybe WanMil (the original author) tried that before and found a reason not to do it. Will search the archives later... Gerd _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto :mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>><mail to:mkgmap-dev at lists.mkgmap.org.uk<mailto:to%3Amkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mai lto:mkgmap-dev at lists.mkgmap.org.uk<mailto:lto%3Amkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>>< mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>> <mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk> >><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org<mailto:mkgmap-dev at lists.mkgmap.org>. uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org<mailto:mkgmap-dev at lists.mkgmap.org> .uk>>>> https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev -- Felix Hartman - Openmtbmap.org & VeloMap.org -- Felix Hartman - Openmtbmap.org & VeloMap.org _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto :mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>><mail to:mkgmap-dev at lists.mkgmap.org.uk<mailto:to%3Amkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mai lto:mkgmap-dev at lists.mkgmap.org.uk<mailto:lto%3Amkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>>> https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev -- Felix Hartman - Openmtbmap.org & VeloMap.org _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto :mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>> https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>><mailto :mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>>> https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev -- Felix Hartman - Openmtbmap.org & VeloMap.org _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk><mailto:mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>> https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev -- Felix Hartman - Openmtbmap.org & VeloMap.org _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk> https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev _______________________________________________ mkgmap-dev mailing list mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk> https://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev -- Felix Hartman - Openmtbmap.org & VeloMap.org -------------- next part -------------- A non-text attachment was scrubbed... Name: merge-roads-reversed-v6.patch Type: application/octet-stream Size: 22858 bytes Desc: merge-roads-reversed-v6.patch URL: <http://www.mkgmap.org.uk/pipermail/mkgmap-dev/attachments/20210507/19f4ace6/attachment-0002.obj> -------------- next part -------------- A non-text attachment was scrubbed... Name: merge-roads-reversed-v5.patch Type: application/octet-stream Size: 23089 bytes Desc: merge-roads-reversed-v5.patch URL: <http://www.mkgmap.org.uk/pipermail/mkgmap-dev/attachments/20210507/19f4ace6/attachment-0003.obj>
- Previous message: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points
- Next message: [mkgmap-dev] patch: improve RoadMerger: allow to merge roads with reversed points
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the mkgmap-dev mailing list