[mkgmap-dev] patch for crash in MapSource

Fri Feb 9 09:02:45 GMT 2018

Hi Gerd,

Sorry , I mean 100, 000 and with me values <400 000 cause a problem

Nick

On 09/02/2018 08:56, Gerd Petermann wrote:
> Hi Nick,
>
> I use max-nodes=100 000, not 10 000, but you may be right that this is important.
> I'll try again with realistic values.
>
> Gerd
>
> ________________________________________
> Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag von osm at pinns <osm at pinns.co.uk>
> Gesendet: Freitag, 9. Februar 2018 09:38
> An: mkgmap-dev at lists.mkgmap.org.uk
> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
>
> Hi Gerd
>
> I'm getting the same issues when I split Devon with max nodes 10 000
>
> in fact anything below 40 000 causes a crash
>
> The tests I made yesterday  was with max nodes 80 000, so perhaps
> somehow its linked to the maxnodes?
>
> r
>
> Nick
>
>
> On 09/02/2018 08:01, Gerd Petermann wrote:
>> Hi Nick,
>>
>> I tried --align-for-dem=360 with your --dem-dists=2484,3312,9942,16560 and my dem-poly
>> and it always crashes :-(
>>
>> It always seems to work with only one of the values, e.g. --dem-dists=2484 or --dem-dists=3312 or --dem-dists=16560
>>
>> So, it seems that I was wrong when I thought that the code behind the "Show Profile..." button would ignore all but the highest
>> resolution.
>>
>> Gerd
>>
>> ________________________________________
>> Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag von osm at pinns <osm at pinns.co.uk>
>> Gesendet: Donnerstag, 8. Februar 2018 22:19
>> An: mkgmap-dev at lists.mkgmap.org.uk
>> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
>>
>> Hi Gerd
>>
>> Just noticed your crash.gdb , which indeed causes a crash
>>
>> However, if I take a different starting point  but still join the a39
>> where your route joins it , I don't get a crash,
>>
>> Very odd that the end sames ok but the beginning.
>>
>> Anyway, will do some more checking tomorrow
>>
>> Nick
>> On 08/02/2018 21:04, osm at pinns wrote:
>>> Hi Gerd
>>>
>>> I can see that , but again no probs here when I used your map
>>>
>>> For my final trial i used some pbf files of the UK which were split
>>> last year without the align for dem option
>>>
>>> This still worked !, ie no crashes ;
>>>
>>> good point - have to check if the dem poly includes empty hgt files.
>>>
>>> Will do some more checking tomorrow.
>>>
>>> Again, congratulations on a major achievement!
>>>
>>> Nick
>>>
>>>
>>> On 08/02/2018 20:36, Gerd Petermann wrote:
>>>> Hi Nick,
>>>>
>>>> okay, sounds good. Do you also use -dem-poly or hgt files with voids?
>>>> I tested a rather small polygon [1] divided into 10 parts, maybe that
>>>> created more stress
>>>> for MapSource.
>>>>
>>>> Maybe we can find other --align-for-dem values or -even better -
>>>> a field in TRE or DEM  or TDB that can be changed to allow more or
>>>> all values.
>>>>
>>>> Gerd
>>>>
>>>> [1] http://files.mkgmap.org.uk/download/412/baddem6b.7z
>>>>
>>>> ________________________________________
>>>> Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag
>>>> von osm at pinns <osm at pinns.co.uk>
>>>> Gesendet: Donnerstag, 8. Februar 2018 21:22
>>>> An: mkgmap-dev at lists.mkgmap.org.uk
>>>> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
>>>>
>>>> Hi Gerd,
>>>>
>>>> Having difficulty creating long distances without stopovers ikn
>>>> Mapsource, but that seems have been the case anyway before dem, at least
>>>> in my case using default style
>>>>
>>>> Have created a long distance one in Basecamp, exported it in Mapsource
>>>> and absolutely no problem with creating profiles! Excellent work !
>>>>
>>>> If I invert the route , ie in Basecamp, and export it in mapsource, same
>>>> : no issues at all
>>>>
>>>> At one stage, I cannot reproduce it ,I just got a black profile, but
>>>> that could be when I a dem was missing.
>>>>
>>>>
>>>> On 08/02/2018 19:11, Gerd Petermann wrote:
>>>>> Hi Nick,
>>>>>
>>>>> great! In my test cases I found problems with long distance routes
>>>>> without any stopover.
>>>>> Please try that as well, maybe also the inverse routes.
>>>>>
>>>>> Gerd
>>>>>
>>>>> ________________________________________
>>>>> Von: mkgmap-dev <mkgmap-dev-bounces at lists.mkgmap.org.uk> im Auftrag
>>>>> von osm at pinns <osm at pinns.co.uk>
>>>>> Gesendet: Donnerstag, 8. Februar 2018 19:01
>>>>> An: mkgmap-dev at lists.mkgmap.org.uk
>>>>> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
>>>>>
>>>>> Hi Gerd
>>>>>
>>>>> Brilliant ! have done a really spaghetti route with lots of ups and
>>>>> downs left and right and
>>>>>
>>>>> seems to be working with align-for-dem=360  and even
>>>>>
>>>>> --dem-dists=2484,3312,9942,16560
>>>>>
>>>>> r
>>>>>
>>>>> Nick
>>>>>
>>>>> On 08/02/2018 17:40, Gerd Petermann wrote:
>>>>>
>>>>> Hi all,
>>>>>
>>>>> I've created patches for splitter and mkgmap.
>>>>> The binaries are here:
>>>>>      http://files.mkgmap.org.uk/download/417/splitter.jar
>>>>> http://files.mkgmap.org.uk/detail/416
>>>>>
>>>>> Please try splitter with align-for-dem=360. I found no more crashes
>>>>> as long
>>>>> as used only one dem level, e.g. dem-dists=3312 or dem-dists=9936
>>>>>
>>>>> Maybe you find a combination of  align-for-dem and dem-dists with
>>>>> more than one value
>>>>> that still works, I'll try again tomorrow.
>>>>>
>>>>> Gerd
>>>>>
>>>>> ________________________________________
>>>>> Von: mkgmap-dev
>>>>> <mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>
>>>>> im Auftrag von Gerd Petermann
>>>>> <gpetermann_muenchen at hotmail.com><mailto:gpetermann_muenchen at hotmail.com>
>>>>> Gesendet: Donnerstag, 8. Februar 2018 13:16
>>>>> An: Development list for mkgmap
>>>>> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
>>>>>
>>>>> Hi all,
>>>>>
>>>>> the patch contained a stupid bug, but there is more to this:
>>>>> 1) the effect of the patch depends on the dem-dists value (I assume
>>>>> only the one
>>>>> that gives the highest resolution). The higher the resolution the
>>>>> better it works.
>>>>> 2) it probably also depends on the boundaries (areas.list)
>>>>>
>>>>> I assume now that the tile boundary from areas.list should be a
>>>>> certain multiples of degrees,
>>>>> probably different multiples for lat and lon and that the overlap
>>>>> simply makes
>>>>> sure that this boundary is within the overlapped area.
>>>>> Maybe the preferred multiples also depend on the dem-dist.
>>>>>
>>>>> I'll try to find out more ...
>>>>>
>>>>> Gerd
>>>>>
>>>>> ________________________________________
>>>>> Von: mkgmap-dev
>>>>> <mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>
>>>>> im Auftrag von osm at pinns <osm at pinns.co.uk><mailto:osm at pinns.co.uk>
>>>>> Gesendet: Donnerstag, 8. Februar 2018 10:33
>>>>> An:
>>>>> mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
>>>>> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
>>>>>
>>>>> Hi Gerd
>>>>>
>>>>> I think you are right ,ie
>>>>>
>>>>> start and finishing point  at same level seems OK eventhough the route
>>>>> turns south 20miles then up again
>>>>>
>>>>> r
>>>>>
>>>>> Nick
>>>>>
>>>>>
>>>>> On 08/02/2018 09:27, Gerd Petermann wrote:
>>>>>
>>>>>
>>>>> Hi all,
>>>>>
>>>>> okay, thanks for testing. I'll try to find a better patch.
>>>>> Please check: I think the patch works fine for routes which cross
>>>>> tile borders in horizontal direction
>>>>> direction but I still see problems with vertical crossing. Can you
>>>>> confirm that?
>>>>>
>>>>> Gerd
>>>>>
>>>>> ________________________________________
>>>>> Von: mkgmap-dev
>>>>> <mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>
>>>>> im Auftrag von Henning Scholland
>>>>> <osm at hscholland.de><mailto:osm at hscholland.de>
>>>>> Gesendet: Donnerstag, 8. Februar 2018 09:59
>>>>> An: Development list for mkgmap
>>>>> Betreff: Re: [mkgmap-dev] patch for crash in MapSource
>>>>>
>>>>> Same for me, but just did quick test. Will try on the weekend more
>>>>> detailed
>>>>> Henning
>>>>> On 8 Feb 2018, at 16:57, lig fietser
>>>>> <ligfietser at hotmail.com<mailto:ligfietser at hotmail.com><mailto:ligfietser at hotmail.com><mailto:ligfietser at hotmail.com>>
>>>>> wrote:
>>>>>
>>>>> Hi Gerd,
>>>>>
>>>>> I tested your patch but I still see frequent crashes near tile borders.
>>>>>
>>>>>
>>>>> ________________________________
>>>>> Van: mkgmap-dev
>>>>> <mkgmap-dev-bounces at lists.mkgmap.org.uk><mailto:mkgmap-dev-bounces at lists.mkgmap.org.uk>
>>>>> namens Gerd Petermann
>>>>> <GPetermann_muenchen at hotmail.com><mailto:GPetermann_muenchen at hotmail.com>
>>>>> Verzonden: woensdag 7 februari 2018 02:45:27
>>>>> Aan:
>>>>> mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
>>>>> Onderwerp: [mkgmap-dev] patch for crash in MapSource
>>>>>
>>>>> Hi all,
>>>>>
>>>>> attached is a patch that seems to help in many cases where
>>>>> --dem-poly causes crashes in MapSource "Show Profile..."
>>>>> A binary is here:
>>>>> http://files.mkgmap.org.uk/download/414/mkgmap.jar
>>>>>
>>>>> It changes the TRE file and the *.tdb file.
>>>>> I still see a few crashes but maybe those are caused by other problems.
>>>>>
>>>>> Please try and let me know your results. I found no bad impact so far,
>>>>> long distance routing still seems to work, but I've not tested much.
>>>>>
>>>>> @Steve: Maybe we have to make sure that the areas in *.tdb do not
>>>>> overlap.
>>>>> In this case this patch is not yet okay.
>>>>>
>>>>> Gerd
>>>>>
>>>>> ________________________________
>>>>>
>>>>> mkgmap-dev mailing list
>>>>> mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
>>>>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>>>>> _______________________________________________
>>>>> mkgmap-dev mailing list
>>>>> mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
>>>>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> mkgmap-dev mailing list
>>>>> mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
>>>>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>>>>> _______________________________________________
>>>>> mkgmap-dev mailing list
>>>>> mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
>>>>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> mkgmap-dev mailing list
>>>>> mkgmap-dev at lists.mkgmap.org.uk<mailto:mkgmap-dev at lists.mkgmap.org.uk>
>>>>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>>>>>
>>>>> _______________________________________________
>>>>> mkgmap-dev mailing list
>>>>> mkgmap-dev at lists.mkgmap.org.uk
>>>>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>>>> _______________________________________________
>>>> mkgmap-dev mailing list
>>>> mkgmap-dev at lists.mkgmap.org.uk
>>>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>>> _______________________________________________
>>> mkgmap-dev mailing list
>>> mkgmap-dev at lists.mkgmap.org.uk
>>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>> _______________________________________________
>> mkgmap-dev mailing list
>> mkgmap-dev at lists.mkgmap.org.uk
>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
>> _______________________________________________
>> mkgmap-dev mailing list
>> mkgmap-dev at lists.mkgmap.org.uk
>> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
> _______________________________________________
> mkgmap-dev mailing list
> mkgmap-dev at lists.mkgmap.org.uk
> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev